<![CDATA[
<body bgcolor="#FFFFFF">
<h1><b>Low Pressure Molding Technology for Insert Molding</b></h1>
<table width="100%" border="0" cellspacing="0" cellpadding="6">
<tr>
<td width="50%" valign="top">
<p>Engineering<br>
Careful engineering fo the mold-set is essential to achieve consistent
high volume production. Mold-sets supplied by Cavist are test and documented
prior to delivery.</p>
<p>Cooling<br>
Proper cooling of the mold-set is important to achieve consistent molding
results. Our Mold-man 8000 machine is equipped for integral cooling via
the upper and lower mold platen, and direct cooling to the mold-set is
not required.</p>
</td>
<td><img src="nf_images/moldset_overview.jpg" width="273" height="155"></td>
</tr>
</table>
<p align="center"><a href="http://www.cavist.com/a_applications_overview.html">Applications</a>
| <a href="http://www.cavist.com/a_materials_overview.html">Materials</a> |
<a href="http://www.cavist.com/a_machines_overview.html">Machines</a> | <a href="http://www.cavist.com/a_moldsets_overview.html">Mold
Sets</a> | <a href="http://www.cavist.com/a_people.html">People</a> | <a href="http://www.cavist.com/a_contact.html">Contact
Us</a> | <a href="http://www.cavist.com">Home</a><br>
<a href="a_applications_encapsulate.html">PCB Encapsulation</a> | <a href="a_applications_encapsulate.html">Hot
Melt Molding</a> | <a href="a_applications_connectors.html">Molded Strain Relief</a>
| <a href="a_applications_encapsulate.html">Electronics Packaging</a><br>
<a href="a_moldsets_design.html">Low Pressure Molding</a> | <a href="a_machines_optimel2002s.html">OptiMel</a>
| <a href="http://www.cavist.com/index.html">Macromelt</a> | <a href="a_machines_moldman8000.html">U/L
94V-0 Polyamide</a></p>
<p align="center">© Copyright <a href="http://www.cavist.com">The Cavist
Corporation</a> 1998 - 2001</p>
<p> </p>
</body>]]>